Radian and Michron Cable Compatibility Guide

One camera shutter cable is included with every Radian 1 and Michron. Michron and Radian 1 are compatible with every device on this list below, and to use them with different cameras all you need to do is to switch cables! Radian 2 can also trigger your camera using a shutter trigger cable, and is compatible with every camera below for shutter control.

Radian 2 and Pulse control cameras via the USB port. Each will be shipped with the appropriate USB cable (either a Micro, Mini, or 8-pin USB cable) for you to use with your Canon or Nikon camera (we're working on further camera compatibility with Sony and Panasonic). The camera compatibility list for USB control can be found here (please scroll down).

If you do not see mention of your camera below, please contact us.

 

Canon

  • Canon N3 Cable : 10D, 20D,30D, 40D, 50D, 7D, 6D, 1Dx, 1D Mark II, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV, 5D, 5D Mark II & 5D Mark III
  • Canon E3 Cable : 60D, 70D, All 'Rebels' (100D, 300D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D, etc), T5i, T4i, T3i, T3, T2i,T1i, TXi, XTi, SL1, Kiss, SX50, G10, G11, G12, G15, G16, G1X
  • Not Supported : SX30, EOS M

Nikon

  • Nikon DC2 Cable : Df, D90, D600, D610, D750, D3100, D3200,D3300, D5000, D5100, D5200, D5300, D7000 and D7100, CoolPix P7800
  • Nikon DC1 Cable : D70S,D80
  • Nikon DC0 Cable : F90x, F90, F100, F6, F5 D4, D3, D3x, D3s, D2, D2H, D2Hs, D2X, D2Xs, D1, D1H, D1X, D200, D300, D300x, D300s, D700, D800, D800E & D810
  • Not Supported : COOLPIX P5100, Coolpix L310, D3000, D40, D50, D60, D70

Pentax

  • Canon E3 Cable: K3, K5, K7, K30, K500, K50, *istD, *istDL, *istDs, *ist, *istDL2, *K100D, K110D, K10D, K200, K20D, K5 II, K5 IIs
  • Not Supported : GF3, K-x

Samsung

  • Canon E3 Cable : GX, 1L, GX 1S, GX-10, GX-20,  NX10 & NX100

Contax

  • Canon E3 Cable : 645, N1, NX, N Digital

FujiFilm

Hasselblad

  • Canon E3 Cable : H Series

Sigma

  • Canon E3 Cable : SD1, SD9, SD10, SD14 & SD15

Kodak

  • Nikon DC0 Cable: DCS-14n

Panasonic

  • Panasonic RS1 Cable: DMC-FZ50 SERIES, DMC-FZ30, DMC-FZ100, DMC-FZ1000, DMC-FZ30, DMC-FZ20, DMC-FZ200, DMC-G1, DMC-GX1, DMC-G2, DMC-G3, DMC-G5, DMC-G10, DMC-GF1, DMC-GH1, DMC-GH2, DMC-GH3, DMC-GH4, DMC- L1 & DMC-L10 SERIES,LC-1,L-1, Lumix GX7 
  • Not Supported : DMC-FZ35

Sony

    Please note that the Sony Hotshoe Mount is not compatible with Michron. You can still use your Michron with Sony cameras, but Michron will not be able to sit in the hotshoe during operation. 

  • Sony S1 Cable : A700, A900, A350, A300, A200, A100, A100k, A33, A35, A37, A55, A57, A65, A77, A580, A560, A550, A500, A850, A700, A100,, A99, A900 Alpha S1
  • Sony S2 Cable : A5000, A5100, A6000, A77ii, A7, A7R, A7S, HX50V, NEX 3N, A58, RX100 II, RX100 III, HX300 and 5000L, A7ii, A7Sii, A7Rii
  • Not Supported :  Nex Series (Nex 3, 5, 7,etc), A230, RX1

Konica Minolta

    Please note that the Minolta Hotshoe Mount is not compatible with Michron. You can still use your Michron with Sony cameras, but Michron will not be able to sit in the hotshoe during operation. 

  • Sony S1 Cable : DIMAGE A2, A1, 9, 7HI,  7I,  7, 5, 4, 3, DYNAX7D, DYNAX5D

Olympus

  • Olympus UC1 Cable : XZ-1, XZ-2, EVOLT SP-510, SP-550, SP-560, SP-565, SP-570, SP-590,E3-0, E-620, E-600, E-520, E-510, E-450, E-420, E-410, E-400,E-300, E-30, PEN E-P1, PEN E-P2, PEN E-P3, PEN E-P5,PEN E-PL2, PEN E-PL3, PEN E-PL5, OM-D E-M5, E-M1, EP1, EP2, EPL2, XZ1, EPL3, EPM1, EP3, E-M5, E620
  • Olympus CB1 Cable : E1, E3, E5, E10, E20,E100 RS
  • Not Supported : PEN E-PL1

How do I buy additional camera cables?   

You can buy additional cables here.